Leather Belt, tooled edges
Hand-tooled leather belt, edges only... just enough detail to add character but not too much and not too busy. Choose from 1-1/4" wide or 1-1/2" wide. Color choices are natural tan or rich brown. Note: The tan starts as a light color and will gradually darken with time and use. This option is vegetable tanned leather and the rich brown is English Bridle leather.
Buckles come in chrome or solid brass. The chrome is silver color and will stay shiny and the brass is gold color (this will naturally tarnish & patina with age).
SIZING: NO PANTS SIZE! Your pant size will NOT work for sizing this custom belt.
Please provide the measurement of WHERE you wear your belts on your body (ex. waist, hips, or somewhere in-between). A soft measuring tape will give the best and most accurate result. Here's how:
Thread the flexible tape measure through the belt loops of your pants and stand in a natural, relaxed position (no sucking in your belly 
). With the tape in a snug - but not tight - position, note the number on the tape (example: 34-1/4", see pic below). This will be the belt size you provide.
If you don't have a soft tape on hand, you can use a piece of string or cord and use the same method above by threading through your belts loops. Mark the spot on the string, then lay it straight and flat on a hard surface, and carefully measure from tip of string to the marked spot. This will be the belt size you provide.
👉 👉 I will use the # you give me as the center hole and add 2 holes on each side (two smaller & two larger) and will leave a 4" tip after the holes. Please be accurate, as I cannot be responsible for wrong measurements.
* * * Indicate size in the "Special Instructions" box at checkout * * *